Thursday, August 9, 2012

Let's Get Acquainted Blog Hop - Fabric Lanyard

Hi and welcome if you are visiting from the Let's Get Acquainted Blop Hop! Today I have a tutorial for a handy fabric lanyard that could be used to hang a number of things - keys, id tags, and thread snips to name a few.
You will need: Basic sewing equipment - cutting mat. rotary cutter, acrylic quilters ruler, sewing machine, pins.
At least 4 x 42 inches of fabric - I am using some cute elephant fabrics similar to the Daiwabo ones, in a white on navy, and a red on white.
And some key ring hardware - such as a large lobster clasp key ring, a swivel or a snap hook, or a split key ring. I found the ones I have used in the bag making section at the craft store.
1. Start by squaring up the edge of your fabric by lining it up with the selvedge and repeatedly folding up the flat bottom edge to meet up with the selvedge until it is wide enough for you to be able to lay it on your cutting mat with one of the marked lines on your quilters ruler lined up with the lower straight edge of the fabric.
2. Cut a width of fabric (WOF) strip about 2.5 - 3 inches wide. Trim off the selvedges so that you end up with a strip about 3 x 42 " wide.
3. Fold the trip in half lengthways and iron flat.
4. Open the strip out again and fold one side so that the raw edge meets the crease in the centre, and press.
5. Repeat for the other side.
6. Fold over so that the raw edges are enclosed in the fold. 
7.Press and pin along the length of the fold. 
8. Lay the folded strip out flat and slide your key ring or clasp onto it, moving it a little way along.
 9. Open out the two ends of the folded strip and pin them right sides together without twisting the strip of fabric.
10. Pin and stitch the ends closed with a half inch seam - you should now have a joined loop/ circle of fabric.
11 . Press the seam open and fold raw edges back in. Press again and repin.
12. You should have a loop about 42 inches long and 1/2 inch wide.
13. Stitch along each side of the lanyard close to the edges, moving the clasp along the strip as you sew so that it isn't in the way.
14. Press again if needed, and your lanyard is ready to use!
15. I made another patchwork version by cutting some 2.5 inch pieces of fabric,
and joining them together with a half inch seam to make a strip approximately 2.5 x 40", then proceeding from step 3 above.
Hope you enjoyed this tutorial! These would make great gifts for teachers, party favours, stocking stuffers, and even for school fetes or stalls.
Kirsten.

17 comments:

  1. So cute, love the ellies marching along :oD

    ReplyDelete
  2. So simple and looks great, good to meet you on the blog hop :)

    ReplyDelete
  3. Awesome! I've always wanted to know how to make a patchwork lanyard. You've made my day!

    ReplyDelete
  4. Brilliant Kirsten. I never would have thought about putting the clasp on and then sewing. I would have ended up with a cack handed join then. Thanks!

    ReplyDelete
  5. Stopping by on the blog hop, already a follower:). Thanks for the tutorial - very cute!

    ReplyDelete
  6. Hi, dropping in from the blog hop, nice to meet you! Super cute lanyards - thanks for the tute! and I'm your newest follower =)

    ReplyDelete
  7. Nice job, Kirsten! I have some lobster clasps...will have to make one of these for my new uniforms!

    ReplyDelete
  8. Thanks for putting together such a great tutorial! I can't wait to make a few of these.

    ReplyDelete
  9. Hi Kristen, nice to meet you. This is a great tutorial.I love how you cut the elephant fabric that looks like they are marching along the strap. Cute

    ReplyDelete
  10. What a fun, easy idea. And, as you said, great for a quick handmade gift!

    ReplyDelete
  11. Hi Kristen, cute little elephants and a great tutorial! I loved "Outlander" series also!

    ReplyDelete
  12. Fun - I especially like the patchwork one. Thanks for sharing, Kirsten!

    ReplyDelete
  13. There are so many uses for a Lanyard. Great tutorial and I'm excited to see the rest of your blog.

    ReplyDelete
  14. I need a new lanyard for my work security pass - thank you for this! :)

    ReplyDelete
  15. Really nice tutorial. I'll try to come back and make one as soon as I can find the time for it. Thanks for sharing.

    ReplyDelete